You have no items in your shopping cart.
Electric Desk - Additional Set Up Instructions
Monday, 5 January 2015 05:01:00 Europe/London
Hopefully the assembly of the desk should be relatively straightforward but there are a couple of points which may not be overly clear which are detailed below.
Although the frame looks symmetrical in the manual, it is not and there is a definite front and back/left and right aspect as shown in the attached pictures. Basically, the short part of the arms and feet should be on the same side as the crossbar.
Also, in the drawing it shows the control box underneath the desk with the smooth side facing the back, when in fact the wires and plugs should be facing back.
Once the frame is assembled correctly, leave the bolts attaching the cross frame and side arms slightly loose, which will help when placing the tabletop. This will allow jiggling room in order to get perfect bolt placement. Once the tabletop is secure then tighten the frame bolts